kotec

Polyphenylene Sulfide

Data

Properties	Standards	Test Conditions	Units
								RS-1340 (GF 40%)	RS-1340S (GF 40%) Impact Modified	RS-1350 (GF 50%)	RS-1360 (GF 60%) Industrial

Mechanical Properties

Izod Impact Strength	ASTM D256	V-Notched 1/8" 23℃	J/m kgf・cm/cm ft・lbf/in	61 6.2 1.1	89 9 1.65	108 11 2	49 5 1
Tensile Strength at break	ASTM D638	---	MPa kgf/cm² lbf/in²	130 1330 18850	120 1220 17290	159 1620 23000	105 1076 15249
Tensile Elongation at break	ASTM D638	---	%	2	4	3	2
Flexural Strength	ASTM D790	---	MPa kgf/cm² lbf/in²	180 1850 26200	170 1760 24940	202 2060 29300	131 1333 18891
Flexural Modulus	ASTM D790	---	MPa kgf/cm² lbf/in²	9500 97000 1375000	9000 92000 1303800	12200 124400 1769000	15470 157900 2238000

Thermal Properties

Melt Flow Rate	ASTM D1238	300℃, 5.0kgf	g/10min	―	―	30	150
Heat Deflection Temperature	ASTM D648	18.6 kgf/cm2	℃	260	260	274	―
Heat Deflection Temperature	ASTM D648	18.6 kgf/cm2	℉	500	500	525	―

Electrical Properties

Dielectric Breakdown Strength	ASTM D149	1.6mm	kV/mm	―	―	16	16
Dielectric Breakdown Strength	ASTM D149	3.2mm	kV/mm	16	16	―	―
Dielectrical Constant	ASTM D150	10⁶ Hz	---	4.0	4.0	4.0	4.0
Dissipation Factor	ASTM D150	10⁶ Hz	---	―	―	―	―
Arc Resistance	ASTM D495	---	sec.	―	―	―	―
Volume Resistivity	ASTM D257	---	Ω・cm	10¹⁶	10¹⁶	10¹⁶	10¹⁶

Optical Properties

Light Transmittance	ASTM D1003	3.0mm	%	―	―	―	―
Light Refractive	ASTM D542	---	---	―	―	―	―
Haze	ASTM D1003	3.0mm	%	―	―	―	―

Other Properties

Specific Gravity	ASTM D792	---	---	1.66	1.62	1.71	1.88
Water Absorption	ASTM D570	24 hrs at 23℃ water immersion	%	0.02	0.02	0.02	0.02
Mould Shrinkage	ASTM D995	MD/TD	%	0.3/0.8	0.3/1.0	―	―
Flammability	UL94	0.75	---	V-0	―	―	―
Flammability	UL94	1.5 mm	---	―	V-0 (equivalent)	V-0(equivalent)	―

* The values contained herein are typical, based on general molding conditions.

Documents (Download)

	Properties	SDS	UL-94
RS-1340		Contact us for SDS * Inquire for SDS from "Contact Us"
RS-1340S			―
RS-1350			―
RS-1360			―

Contact Us