Polyetheretherketone
Recycled materials
Data
| Properties | Standards | Test Conditions | Units | Recycled | |||
| PKR-10 | PKR-20 | PKR-30 | PKR-30G30 (GF 30%) |
||||
Mechanical Properties
| Charpy impact strength | ISO 179 | Notched, 23℃ | KJ/ｍ２ | 4 | 5 | 6 | 11 |
| Unnotched, 23℃ | No break | No break | No break | No break | |||
| Tensile Strength at break | ISO 527 | 4.0t 23℃ | MPa | 95 | 95 | 95 | 172 |
| Tensile Elongation at break | ISO 527 | 4.0t 23℃ | % | 20 | 17 | 16 | 5 |
| Flexural Strength | ISO 178 | 4.0t 23℃ | MPa | 150 | 150 | 150 | 256 |
| 4.0t 125℃ | 88 | 88 | 85 | ― | |||
| 4.0t 175℃ | 19 | 19 | 17 | ― | |||
| 4.0t 275℃ | 11 | 11 | 10 | ― | |||
| Flexural Modulus | ISO 178 | 4.0t 23℃ | MPa | 3500 | 4200 | 3600 | 12390 |
Thermal Properties
| Flammability | UL94 | --- | --- | (Equiv. V-1) (1.5 mm) | (Equiv. V-0) (1.5 mm) | (Equiv. V-0) (1.5 mm) | (Equiv. V-0) (0.5 mm) |
| Heat Deflection Temperature | ISO 75 | 1.82 MPa | ℃ | 155 | 152 | 152 | 328 |
| ℉ | 311 | 306 | 306 | 622 | |||
| Melt Flow Rate | ISO 1133-1 | 400℃ 2.16 kgf | g/10 min. | 33 | 5 | 3 | ― |
Physical Properties
| Specific Gravity | ASTM D792 | --- | --- | 1.30 | 1.30 | 1.30 | 1.33 |
| Mould Shrinkage | ISO 294 | Parallel | % | 1.0 | 1.0 | 1.0 | 0.3 |
| Across | 1.3 | 1.3 | 1.3 | 0.9 |
Electrical Properties
| Dielectric Breakdown Strength | IEC 60243-1 | 2.5t | kV/mm | 16 | 16 | 16 | 25 |
| Dielectric Constant | IEC 60250 | 23℃ 1kHz | --- | 2.9 | 2.9 | 2.8 | 3.2 |
| Dielectric Dissipation Factor | IEC 60250 | 23℃ 1kHz | --- | 0.005 | 0.005 | 0.003 | 0.005 |
| Volume Resistivity | IEC 60093 | 23℃ | Ω・cm | 1016 | 1016 | 1016 | 1016 |
* The values contained herein are typical, based on general molding conditions.
Documents (Download)
| Properties | SDS | UL-94 | |
|---|---|---|---|
| PKR-10 |
|
Contact us for SDS * Inquire for SDS from "Contact Us" |
― |
| PKR-20 |
|
― | |
| PKR-30 |
|
― | |
| PKR-30G30 |
|
― |