To access to TDS and MSDS : Click a grade in the table below

Properties	Standards	Test Conditions	Units	Flame Retardant (Non-brominated & Non-chlorinated)
				K-30FR	K-30 FRT12	KFN-30	KFN-30T12
Mechanical Properties
Izod Impact Strength	ASTM D256	V-Notched 1/8" 23°C	J/m kgf.cm/cm ft.lbf/in	780 80 15	830 85 16	780 80 15	830 85 16
Tensile Strength at break	ASTM D638	-		63 640 9100	63 640 9100	63 640 9100	63 640 9100
Tensile Elongation at break	ASTM D638	-	%	120	120	120	120
Flexural Strength	ASTM D790	-		84 860 12200	84 860 12200	85 870 12400	85 870 12400
Flexural Modulus	ASTM D790	-		2160 22000 313000	2160 22000 313000	2160 22000 313000	2160 22000 313000
Rockwell Hardness	R scaie	-	-	120	120	120	120
Thermal Properties
Flammability	UL-94	-	-	V-0 (3.0mm)	V-0 (3.0mm)	V-0 (1.5mm)	V-0 (1.5mm)
Heat Deflection Temperature	ASTM D648	-	°C °F	132 269	133 271	132 269	133 271
Melt Flow Rate	ASTM D1238	300°C 1.2kgf	g/10 min.	15	12	15	12
Optical Properties
Light Transmittance	ASTM D1003	3.0mm	%	89	89	Opaque	Opaque
Light Refractive Index	ASTM D542	-	-	1.58	1.58	-	-
Haze	ASTM D1003	3.0mm	%	< 1	< 1	-	-
Physical Properties
Specific Gravity	ASTM D792	-	-	1.20	1.20	1.20	1.20
Water Absorption	ASTM D570	24hrs@23°C Water immersion	%	0.2	0.2	0.2	0.2
Mould Shrinkage	ASTM D995	Parallel	%	0.5-0.7	0.5-0.7	0.5-0.7	0.5-0.7
Electrical Properties
Dielectric Breakdown Strength	ASTM D149	-	KV/mm	20	20	20	20
Dielectric Constant	ASTM D150		-	2.9	2.9	2.9	2.9
Dielectric Dissipation Factor	ASTM D150		-	0.009	0.009	0.009	0.009
Arc Resistance	ASTM D495	-	sec.	110	110	110	110
Volume Resistivity	ASTM D257	-

TDSs for all grades are available in PDF format. To download: Click the icon and click "save in file."