To access to TDS and MSDS : Click a grade in the table below

Properties	Standards	Test Conditions	Units	Glass Fibre Reinforced
				KG-10MRA	KG-15MRA	KG-20MRA	KG-30MRA
Mechanical Properties
Izod Impact Strength	ASTM D256	V-Notched 1/8" 23°C	J/m kgf.cm/cm ft.lbf/in	69 7 1.3	80 8 1.5	90 9 1.6	100 10 1.8
Tensile Strength at break	ASTM D638	-		74 750 11000	98 1000 14200	108 1100 15600	127 1300 18500
Tensile Elongation at break	ASTM D638	-	%	5	4.5	4	3
Flexural Strength	ASTM D790	-		118 1200 17100	132 1350 19200	152 1550 22000	162 1650 23400
Flexural Modulus	ASTM D790	-		3530 36000 512000	4410 45000 639000	5690 58000 824000	7550 77000 1090000
Rockwell Hardness	R scaie	-	-	-	-	-	-
Thermal Properties
Flammability	UL-94	-	-	V-2@1.5mm V-0@3.0mm	V-2@1.5mm V-0@3.0mm	V-2@1.5mm V-0@3.0mm	V-2@1.5mm V-0@3.0mm
Heat Deflection Temperature	ASTM D648	-	°C °F	140 284	143 289	145 293	146 294
Melt Flow Rate	ASTM D1238	300°C 1.2kgf	g/10 min.	-	-	-	-
Optical Properties
Light Transmittance	ASTM D1003	3.0mm	%	Translucent	Translucent	Translucent	Translucent
Light Refractive Index	ASTM D542	-	-	-	-	-	-
Haze	ASTM D1003	3.0mm	%	-	-	-	-
Physical Properties
Specific Gravity	ASTM D792	-	-	1.27	1.30	1.35	1.43
Water Absorption	ASTM D570	24hrs@23°C Water immersion	%	0.2	0.2	0.2	0.2
Mould Shrinkage	ASTM D995	Parallel Across	%	0.3-0.5 0.3-0.5	0.3-0.5 0.3-0.5	0.3-0.4 0.3-0.5	0.2-0.4 0.3-0.5
Electrical Properties
Dielectric Breakdown Strength	ASTM D149	-	KV/mm	20	20	20	20
Dielectric Constant	ASTM D150		-	2.9	3.2	3.2	3.2
Dielectric Dissipation Factor	ASTM D150		-	0.008	0.008	0.008	0.008
Arc Resistance	ASTM D495	-	sec.	110	110	110	110
Volume Resistivity	ASTM D257	-

TDSs for all grades are available in PDF format. To download: Click the icon and click "save in file."