To access to TDS and MSDS : Click a grade in the table below

Properties	Standards	Test Conditions	Units	Electrically Conductive
				K-30CF10	K-30CF10X	KG-15CF15
Mechanical Properties
Izod Impact Strength	ASTM D256	V-Notched 1/8" 23°C	J/m kgf.cm/cm ft.lbf/in	80 8 1.5	80 8.9 1.6	83 8.5 1.6
Tensile Strength at break	ASTM D638	-		117 1200 17000	117 1200 17000	140 1430 20300
Tensile Elongation at break	ASTM D638	-	%	4	4	-
Flexural Strength	ASTM D790	-		150 1530 21700	150 1530 21700	170 1750 24800
Flexural Modulus	ASTM D790	-		5700 58200 828000	6860 70000 992000	9100 92500 1310000
Rockwell Hardness	R scaie	-	-	-	-	-
Thermal Properties
Flammability	UL-94	-	-	(Equiv.V-2) (1.6mm)	V-0@1.6mm	(Equiv.V-0) (1.6mm)
Heat Deflection Temperature	ASTM D648	-	°C °F	140 284	140 284	-
Melt Flow Rate	ASTM D1238	300°C 1.2kgf	g/10 min.	-	-	-
Optical Properties
Light Transmittance	ASTM D1003	3.0mm	%	Opaque	-	Opaque
Light Refractive Index	ASTM D542	-	-	-	-	-
Haze	ASTM D1003	3.0mm	%	-	-	-
Physical Properties
Specific Gravity	ASTM D792	-	-	1.24	1.24	1.37
Water Absorption	ASTM D570	24hrs@23°C Water immersion	%			-
Mould Shrinkage	ASTM D995	Parallel Across	%	0.3-0.5 0.3-0.5	0.3～0.5	0.3-0.5 0.3-0.5
Electrical Properties
Dielectric Breakdown Strength	ASTM D149	-	KV/mm	-	-	-
Dielectric Constant	ASTM D150		-	-	-	-
Dielectric Dissipation Factor	ASTM D150		-	-	-	-
Arc Resistance	ASTM D495	-	sec.	110	110	110
Surface Resistivity	ASTM D257	-		-		-
Volume Resistivity	ASTM D257	-

TDSs for all grades are available in PDF format. To download: Click the icon and click "save in file."